Despite being seemingly insignificant, the strap is an important part of any camera irrespective of its price. It keeps your precious camera from falling and slipping. But – not many beginners know how to attach camera strap correctly.
Cameras can be quite heavy, especially when you use the lens and flash as well. Loosely or incorrectly attached strap cannot hold such a huge weight and would give way at some stage. If you don’t want your camera to get damaged, you should learn how to attach a camera strap before you start using the camera itself.
Steps to Attach Camera Straps the Right Way
It is also pretty easy to attach a camera strap. It only involves a few steps that are as below. We strongly recommend going through these canon camera strap instructions if you want to keep your camera safe while in use.
Step 1: Every camera strap has a plastic buckle with two plastic strips and the strap itself passes through them. The plastic buckle should face upwards.
Step 2: Now pass the plastic strap from the outside of the metal ring towards the camera.
Step 3: Pass the strap through the plastic fastener and pull it upwards.
Step 3: Now create a slack by pulling the strap from the top of the buckle.
Step 4: Feed the loose end of the strap towards the inside of the loop from the top buckle hole.
Step 5: Now feed the strap from the inside of the loop through the bottom hole.
Step 6: Now pull the loose strap down in such a way that is right in between the other two parts of the strap.
Step 7: Tighten the slack in the buckle by pulling the main part of the strap up.
Step 8: Pull the fastener up towards the buckle. It will further tighten the strap and eliminate the chances of camera slips.
Step 8: Tighten the strap on the other end by repeating the same process.
Final Thoughts
Congratulations! You have just learned how to attach camera strap correctly. Now you can securely fasten your camera and use it to take beautiful pictures without any worries.